Homematic 103584 Wireless control hub 103584 Manuale Utente
Codici prodotto
103584
42
43
Information and error messages indicated by the device LEDs
State
Power
LED
Internet
LED
Info
LED
Remedy
Hardware starts
On
On
On
If the LED does not exit this state,
start the recovery system (see
Section 10.2)
System start is
running
On
Off
Flashing
quickly
If the LED does not exit this state,
start the recovery system (see
Section 10.2)
Internet connec-
tion present
On
On
---
---
Service messa-
ges pending or
updates available
On
---
Flashing
Check the system messages in
WebUI or perform an update
Update is being
imported
Flashing
quickly
---
Flashing
quickly
Please wait until the update has
been imported
Alarm messages
pending
On
---
Flashing
quickly
Check the system messages in
WebUI
No network
connection
On
Off
---
Check your network cable and the
connection between the Central
Control Unit and router/switch
No IP address
On
Flashing
quickly
---
Check your network configura-
tion. If there is no DHCP server,
proceed as described in
Section 10.1.2
IP address pre-
sent, no Internet
connection
On
Flashing
---
Check the network configuration of
your router
Recovery system
started
Flashing
Flashing
Flashing
Wait until the recovery system has
finished running
10 Notes on rectifying malfunctions
10.1 WebUI is not loaded when the URL
http://homematic-ccu2 is entered
If you are not taken to the WebUI user interface when you enter
http://homematic-ccu2 in your web browser, there are various solu-
tions for rectifying the problem.
http://homematic-ccu2 in your web browser, there are various solu-
tions for rectifying the problem.
10.1.1 Entering the IP address of your Central Control Unit
Instead of http://homematic-ccu2, you can enter the IP address of
your Central Control Unit in your web browser in order to access
WebUI. There are two ways in which you can find out the IP
address of your Central Control Unit:
your Central Control Unit in your web browser in order to access
WebUI. There are two ways in which you can find out the IP
address of your Central Control Unit:
a) Displaying the IP address via the network settings
You can find out the IP address via the properties of your Central
Control Unit. To do this, proceed as follows:
• Open Windows Explorer. Click on Network.
• Select your Central Control Unit, right-click on it, and select
Control Unit. To do this, proceed as follows:
• Open Windows Explorer. Click on Network.
• Select your Central Control Unit, right-click on it, and select
“Properties”.