Fanimation Extraordinaire Nickel OF110SN OF110SN Manuale Utente
Codici prodotto
OF110SN
3
This Manual is Designed to Make it as Easy as Possible for You
to Assemble, Install, Operate, and Maintain Your Ceiling Fan
Unpacking Instructions
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all
steps have been completed and will be helpful in fi nding your place should you be interrupted.
steps have been completed and will be helpful in fi nding your place should you be interrupted.
Wiring outlet box and box connectors must be of type re-
quired by local code. The minimum wire would be a 3-con-
ductor (2-wire with ground) of the following size:
quired by local code. The minimum wire would be a 3-con-
ductor (2-wire with ground) of the following size:
NOTE: Place the parts from the loose parts bags in a
small container to keep them from being lost. If any parts
are missing, contact your local retailer.
small container to keep them from being lost. If any parts
are missing, contact your local retailer.
Tools Needed for Assembly
Materials
•
One Phillips head screwdriver
•
One stepladder
•
One ¼
˝
blade screwdriver
•
7
⁄
16
˝
Socket head wrench
•
One wire stripper
Wire Size A.W.G.
Installed Wire Length
14
12
12
Up to 50 ft.
50 - 100 ft.
NOTE: If you are uncertain of part description, refer to
exploded view illustration. (Figure 1, page 11)
exploded view illustration. (Figure 1, page 11)
Check to see that you have received the following parts:
Downrod
Assembly
Hanger
Bracket
Assembly
Ceiling Fan
Assembly
Hardware Bag
CW110
Wall Control
Ceiling Canopy
• Ceiling Fan assembly
• Downrod assembly
• Ceiling Canopy
• Hanger Bracket assembly
• Motor Coupling Cover
• CW110 Wall Control
• Hardware bag:
– Four wire connectors
– 7/16˝ wrench
– ˝ x 5˝ lag bolt with Flat Washer
– Phillips screwdriver, 1½˝
• Support Cable bag:
– Ceiling Support Cable
– Cable Clamp
– ˝ x 2˝ lag bolt
– ˝ fl at washer
• Downrod assembly
• Ceiling Canopy
• Hanger Bracket assembly
• Motor Coupling Cover
• CW110 Wall Control
• Hardware bag:
– Four wire connectors
– 7/16˝ wrench
– ˝ x 5˝ lag bolt with Flat Washer
– Phillips screwdriver, 1½˝
• Support Cable bag:
– Ceiling Support Cable
– Cable Clamp
– ˝ x 2˝ lag bolt
– ˝ fl at washer
Motor Coupling
Cover
▲WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation could
result in personal injury or property damage. Contact
your retail store for missing or damaged parts.
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation could
result in personal injury or property damage. Contact
your retail store for missing or damaged parts.
▲WARNING
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 4). If you feel you
do not have enough wiring knowledge or experience,
have your fan installed by a licensed electrician.
proper method of wiring your fan (page 4). If you feel you
do not have enough wiring knowledge or experience,
have your fan installed by a licensed electrician.
NOTE: The illustration shown is not to scale or its actual confi guration may vary.
Wires partially removed for clarity.
Wires partially removed for clarity.