Cisco Spare 160-GB Cold Swap SATA Drive for Cisco MCS 7816-H3 HDD-7816-H3-160= Scheda Tecnica
Codici prodotto
HDD-7816-H3-160=
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 5
Serviceable SATA Disk Drives
The Cisco MCS 7816-H3 is configured with one 160-GB SATA “cold-pluggable” disk drive, which is
accessible to the end user through openings in the front bezel of the server. If a drive fails, the
user can schedule server downtime, power down the server, and replace the failed SATA drive by
simply removing it (each drive is equipped with a front latch that positively mates the drive to the
server) and replacing it with an unconfigured spare drive.
DAT Tape Drive Support
The Cisco MCS 7816-H3 can support a 36-/72-GB universal-serial-bus (USB) external Digital
Audio Tape (DAT) drive (part number DAT-USB-EXT-72=) or an optional 36-/72-GB USB rack-
mount DAT drive (part number DAT-USB-RM-72=). This tape drive connects through one of the
USB 2.0 ports provided by the Cisco MCS 7816-H3 server.
Product Specifications
Table 1.
Product Specifications
Processor (CPU)
Intel Celeron D 352
Processor internal clock speed
3.2 GHz
Level 2 cache
512 KB
Maximum processors
1
Processors installed
1
Basic input/output system (BIOS) type
Flash
Table 2.
Memory Specifications
Memory maximum
8 GB
Memory bus clock
667 MHz
Memory technology
PC2-5300 667-MHz DDR2 synchronous dynamic RAM (SDRAM)
Total RAM slots
4
Memory installed
2 GB (two 1-GB dual in-line memory modules [DIMMs])
Table 3.
RAID Controller Specifications
Controller model
None
Interface
Cache
Battery-backed write cache
RAID levels supported
Table 4.
Hard Disk Specifications
Cold-swappable bays
2
Hard disk interface type
SATA
Hard disk installed
One 160 GB
Hard disk (rpm)
7200
Hard disk average seek time
9 ms
Data transfer rate (burst)
150 MB per second