Trekstor Vibez 12Gb 72930 Manuale Utente

–  –

–  –

Select "a

ppeNd

" to add a track at the end of the current playlist.

Select "e

NQueue

" to add a track to the current playlist. The selected track is added after the track currently being 

played.

Select "r

eorder

" to change the position of the selected track in the current playlist, meaning relocating the track 

forward or backward.

Select "r

eMoVe

" to remove a track from the current playlist. You can choose whether you would like to remove a certain 

track, all tracks of the artist performing the current track, all tracks of the artist’s album, all tracks of a genre, all tracks 

of a year, all tracks below or above the selected track in the playlist or the entire tracks of the current playlist from 

the playlist.

If you select "M

ake

 p

laylist

" you have the option to save the current playlist under any name.

13.3)… Record

You have the option to choose  different recording sources with the vibez. You can make voice recordings using the 

integrated microphone. You can connect an external device (e.g. CD player) to the line-in jack (headphone jack) using 

the enclosed line-in cable, and directly record music from it.

To start recording:

•  Press the  button to activate the main menu.

•  Select the menu item "r

eCord

". 

•  In the following menu you can select "V

oiCe

" for voice recordings and "l

iNe

 

iN

" for line-in recordings.

•  Start recording by pressing the  button.

•  A repeated pressing of the  button will set the record function on hold.

•  By briefly pressing the  button, you can stop the current recording and begin a new recording at the same 

time (i. e. a new file is created).

•  To stop a recording activate the main menu by pressing the  button and select the menu item "r

eCorder

".  

To stop recording now, select "s

top

". 

•  To stop the current recording and immediately start a new recording, select "s

plit

". 

•  To change the recording source (voice or line-in), select "C

HaNge

 

sourCe

". The current recording is stopped when the 

recording source is changed.

Exit recording mode and change back to Player mode as follows:

•  Press the  button to activate the main menu.

•  Select the menu item "r

esuMe

 p

lay

".

•  The playback function is now continued where it was last interrupted.