B B Thermotechnik B & B Thermotechnik CON-SENSW-TF-M10 Temperature Sensor With M10 Thread Temperature sensor pressure-resistant with hex s CON-SENSW-TF-M10 Scheda Tecnica
Codici prodotto
CON-SENSW-TF-M10
DATA SHEET
Technical changes reserved
0141 0316-98 07/2014
0141 0316-98 07/2014
Description
Description
Technical data
Temperature measurement
Measuring range
-40 .. 80 °C (100 °C short time)
Sensorelement
NTC SEMI 833
Resistance range
5 ... 96 kΩ (47,54 kΩ bei 23,0 °C)
Tolerance
± 2 % of the resistance value
Linearisation
with integrated parallel resistor (100k)
General
Dimensions of
sensor tube
sensor tube
Ø 7 x 20 mm
Pressure withstanding
capacity
capacity
20 bar
Mounting threads
ISO M10 x 1.5 L=7 mm
Sensing unit material
Stainless steel 1.4305
Cable material
Polyurethane, oil resistant
Gasket ring material
BUNA-N
Connection
RJ12-Plug, 6-pin
Cable gland
M16
Cable length
1 m
Guarantee
24 moths
Art.-No.
SENSW-TF-M10
Pressure resistant temperature probe for
sensor control module
Characteristic features
• Temperature sensor in stainless steel housing
• Pressure resistant up to 20 bar
• M10 x 1.5 screw threads
• Inserted BUNA-N sealing gasket
• Pressure resistant up to 20 bar
• M10 x 1.5 screw threads
• Inserted BUNA-N sealing gasket
Areas of applications
• Heating and solar systems
• Building instrumentation
• Compressed air systems and Hydraulics
• Building instrumentation
• Compressed air systems and Hydraulics
Range of applications
Universal, pressure resistant temperature sensor for general appli-
cations e.g. heating and solar systems or industrial applications. The
sensor housing of stainless steel grade 1.4305 is mechanically robust
and resistant to most of the chemicals. With the M10x1.5 ISO-screw
threads, direct mounting of the sensor on pipelines is possible, and this
ensures a good thermal contact to the medium. The gasket ring provi-
ded on the threaded flange tightly seals over flat surfaces.
cations e.g. heating and solar systems or industrial applications. The
sensor housing of stainless steel grade 1.4305 is mechanically robust
and resistant to most of the chemicals. With the M10x1.5 ISO-screw
threads, direct mounting of the sensor on pipelines is possible, and this
ensures a good thermal contact to the medium. The gasket ring provi-
ded on the threaded flange tightly seals over flat surfaces.
This temperature sensor together with the universal sensor control mo-
dule SENSW-MOD12V / SENSW-MOD24V / SENSW-GEH230V works
as a thermostat for universal applications.
dule SENSW-MOD12V / SENSW-MOD24V / SENSW-GEH230V works
as a thermostat for universal applications.
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
1 / 3