Fluke I40S-PRClip-on ammeter adapter 15 mm 3949777 Scheda Tecnica

Codici prodotto

3949777

PN 3950028 January 2011

respective companies. Product specifications are subject to change without notice.

i40s-PR 1750 40A

AC Current Clamp

Instruction Sheet

Introduction

The i40s-PR 1750 40A AC Current Clamp operates with the Fluke 1750 Power

Recorder. It supplies accurate nonintrusive measurement of ac current. The probe

has a current range from 0.05 A to 40 A. The frequency range is 40 Hz to 5 kHz. The

clamp is approved for CAT III 600 V.

Contacting Fluke

To contact Fluke, call:
USA: 1-888-44-FLUKE (1-888-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
USA Service: 1-888-99-FLUKE (1-888-993-5853)
Or, visit Fluke’s website at www.fluke.com.
To register your product, visit http://register.fluke.com.

Safety Information



Safety Information

To prevent electrical shock or personal injury:

● Carefully read all instructions.

● Use the product only as specified, or the protection supplied by the

product can be compromised.

● Comply with local and national safety codes. Use personal protective

equipment (approved rubber gloves, face protection, and flame-resistant

clothes) to prevent shock and arc blast injury where hazardous live

conductors are exposed.

● Hold the product behind the tactile barrier.

● Before each use, examine the product. Look for cracks or missing pieces

of the clamp housing or output cable insulation. Also look for loose or

weakened components. Carefully examine the insulation around the jaws.

● Do not exceed the Measurement Category (CAT) rating of the lowest rated

individual component of a product, probe, or accessory.

● Use the Clamp only on insulated conductors.

● Use caution around bare conductors or bus bars.

● Do not touch the conductor.

● Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V dc.

● Do not use the product around explosive gas, vapor, or in damp or wet

environments.

For more information about the category rating, see the 1750 Power Recorder

Getting Started Guide.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for one

year from the date of purchase. This warranty does not cover fuses, disposable

batteries, or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to extend

any other warranty on Fluke’s behalf. To obtain service during the warranty period,

contact your nearest Fluke authorized service center to obtain return authorization

information, then send the product to that Service Center with a description of the

problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH

AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.

FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the exclusion or limitation

of an implied warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

text.indd 1

1/5/2011 8:57:27 AM