NEC AccuSync® LCD93V LCD93V Manuale Utente

English

Your new NEC LCD monitor box* should contain the following:

•

LCD monitor with tilt base

•

Power Cord

•

User’s Manual

•

CD-ROM

•

Base Stand

•

Cable Holder

To attach the Base to the LCD Stand:

1. Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1).

2. Attach the Base to the Stand. The locking tab on the Base should fit into the hole on the back of the Stand (Figure S.1).

To attach the Cable Holder:

1. Attach the Cable Holder on to the Base. Insert the hooks on the Cable Holder into the holes at the back of the Stand and

slide the Cable Holder downward into place (Figure S.1).

Please confirm that the tabs are completely secure.

To attach the LCD monitor to your system, follow these instructions:

1. Turn off the power to your computer.

2. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable connected with the monitor to the connector

of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini
D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.2). Tighten all screws.

Some Macintosh systems do not require a Macintosh cable adapter.

User’s Manual

Power Cord

Base Stand

LCD monitor

Captive type (Video signal cable is

connected)

Base

Locking Tabs

Stand

Macintosh Cable
Adapter (not included)

CD-ROM

Cable Holder

Cable Holder

*

Remember to save your original box and packing material to transport or ship the monitor.