Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente
Codici prodotto
11-02-01-03-10.014
INSYS GPRS 5.0 serial
Installation
Mai 06
15
4.5
Installation Instructions
Please observe our safety instructions.
1.
Have the SIM card and PIN number ready, but do not insert the card yet
2.
Mounting on DIN rail
3.
Connecting the power supply
a) Connect the ground connection
b) Connect the power supply 10..60V DC
Note: The minimum value is 10V DC.
a) Connect the ground connection
b) Connect the power supply 10..60V DC
Note: The minimum value is 10V DC.
The maximum value is 60V DC.
4.
Connect the antenna and switch the power supply on
The power LED will light up.
The power LED will light up.
5.
Wait until the device has powered up
The status LED blinks during this process.
The signal LED blinks when the process is completed.
The status LED blinks during this process.
The signal LED blinks when the process is completed.
6.
Connection to the PC
Connect the 9-pin jack at the modem with the serial interface of your computer.
Connect the 9-pin jack at the modem with the serial interface of your computer.
For the configuration, the PC settings (Menu "Interface") and the INSYS GPRS 5.0
serial settings (tab "Basic settings") must be identical.
PC
NSYS
GPRS
5.0
serial
The two interfaces can be adjusted using the button "Synchronize RS232".