Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente
Codici prodotto
11-02-01-03-10.014
Installation
INSYS GPRS 5.0 serial
22
Mai 06
4.6
Operating Modes
4.6.1 Command mode
4.6.1.1 Offline
The offline command mode is the state after the GSM/GPRS engine
was booted and initialized, or after a reset of the INSYS GPRS 5.0 se-
rial. During the offline command mode the INSYS GPRS 5.0 serial can
be addressed via AT commands.
The offline command mode is the state after the GSM/GPRS engine
was booted and initialized, or after a reset of the INSYS GPRS 5.0 se-
rial. During the offline command mode the INSYS GPRS 5.0 serial can
be addressed via AT commands.
4.6.1.2 Online
The INSYS GPRS 5.0 serial can be switched to online command mode
during a data connection (CSD, GPRS, “TCP transparent”).
After switching from data mode to online command mode, the con-
nection will remain established, but no data is transmitted to the
remote terminal. The online command mode is also entered by DTR
drop (setting AT&D1) or by activating the reset input twice within 10
seconds.
Note: Terminating connections see Chapters 4.2.6 and 4.4.4
The INSYS GPRS 5.0 serial can be switched to online command mode
during a data connection (CSD, GPRS, “TCP transparent”).
After switching from data mode to online command mode, the con-
nection will remain established, but no data is transmitted to the
remote terminal. The online command mode is also entered by DTR
drop (setting AT&D1) or by activating the reset input twice within 10
seconds.
Note: Terminating connections see Chapters 4.2.6 and 4.4.4
4.6.1.3 Remote
Note: See Chapter 6.6 “Remote Configuration”
Note: See Chapter 6.6 “Remote Configuration”
4.6.1.4 SMS configuration
Note: See Chapter 6.4 “Automatic SMS Processing”
Note: See Chapter 6.4 “Automatic SMS Processing”
4.6.2 Connection mode
Depending on the connection type, the data is transformed unal-
tered from and to the application (CSD call, GPRS call) or processed
by integrated TCP/IP stacks of the
tered from and to the application (CSD call, GPRS call) or processed
by integrated TCP/IP stacks of the
µ
controller (TCP transparent).
<1 Sec. Pause>
+++
<1 Sec. Pause>
+++
<1 Sec. Pause>