Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente
Codici prodotto
11-02-01-03-10.014
INSYS GPRS 5.0 serial
Functions
Mai 06
53
6.7
Firmware Update
The firmware of the µcontroller can be loaded locally (via the serial inter-
face), and remote (CSD or "TCP transparent" connection).
face), and remote (CSD or "TCP transparent" connection).
Before the firmware is updated, hardware handshake must always
be activated (INSYS GPRS 5.0 serial and remote terminal).
The process is started. The device prepares itself for receiving the new
firmware.
After the response, the firmware (file with the ending *.hex) is sent as a
text file.
After the file has been received, the device needs up to 60 seconds to
complete the upload. After that, the INSYS GPRS 5.0 serial will automati-
cally restart.
Note: Depending on the loaded firmware version, the settings for the
The process is started. The device prepares itself for receiving the new
firmware.
After the response, the firmware (file with the ending *.hex) is sent as a
text file.
After the file has been received, the device needs up to 60 seconds to
complete the upload. After that, the INSYS GPRS 5.0 serial will automati-
cally restart.
Note: Depending on the loaded firmware version, the settings for the
extended functions are reset to factory settings after the update.
The SIM card PIN (AT**PIN) and the standard command settings of
the GSM/GPRS engine are maintained, which means that if auto-
matic call acceptance (e.g. ATS0=2) is activated, the device can still
be accessed from outside to enable the re-configuration of the ex-
tended functions per CSD call via remote configuration.
The SIM card PIN (AT**PIN) and the standard command settings of
the GSM/GPRS engine are maintained, which means that if auto-
matic call acceptance (e.g. ATS0=2) is activated, the device can still
be accessed from outside to enable the re-configuration of the ex-
tended functions per CSD call via remote configuration.
6.8
Virtual COM Port
Applications, which up to now communicated with the end devices via a
modem connection or directly via a serial interface, will not function with
TCP connections directly.
A virtual COM port is required, which will process TCP connections on one
side and make a COM port to the operating system available on the other
side.
INSYS MICROELECTRONICS GmbH offers a free virtual COM port for the op-
erating systems Windows XP/2000. Please request more detailed informa-
tion from insys@insys-tec.de.
modem connection or directly via a serial interface, will not function with
TCP connections directly.
A virtual COM port is required, which will process TCP connections on one
side and make a COM port to the operating system available on the other
side.
INSYS MICROELECTRONICS GmbH offers a free virtual COM port for the op-
erating systems Windows XP/2000. Please request more detailed informa-
tion from insys@insys-tec.de.
AT**FLASH
Send *.HEX
file now