Insys ISDN Terminal Adapter 4.0 11-02-01-02-00.015 Manuale Utente
Codici prodotto
11-02-01-02-00.015
18
Operating Manual INSYS ISDN TA 4.0
Version 2.02 – 01.04
racctabx nn/ss
set entry number x to ISDNnumber nn and subaddress ss
racctabx-
clear entry number x
racctabx *
allow all incoming calls to be accepted
racctabx
display entry number x
racctab display
all
entries
Maximum number of entries
=
3
Maximum length of ISDN number =
20 digits
Maximum length of subaddress
=
20 digits
The ISDN number can contain wildcards:
* : represents one or more digits
? : represents exactly one digit
Examples:
racctab1 1234567890
accepts only specified number
racctab2 *456*
accepts all numbers with 456 somewhere in the middle
racctab3 ? 2345678 ??
accepts all number with 2345678 in the middle preceeded by one digit and
followed by two digits.
followed by two digits.
racctab2 *1234/987
accepts all numbers that end with 1234 and have the subaddress 987
racctab3 *
accepts all incoming calls without subaddress
racctab3-
clears entry no. 3
5.2.2 TA+ Configurator Commands
The TA+ configuration commands have to be entered correctly and completely, including
all blanks.
Capital/small letter use is not important.
Examples for using the commands:
[?]<command>[=parameter]
Set the ISDN B channel protocol to X.75:
prot=10
Display the selected ISDN protocol:
prot
Display all selectable ISDN protocols:
?prot
all blanks.
Capital/small letter use is not important.
Examples for using the commands:
[?]<command>[=parameter]
Set the ISDN B channel protocol to X.75:
prot=10
Display the selected ISDN protocol:
prot
Display all selectable ISDN protocols:
?prot