Insys GSM LOGO 4.2 Compact 11-02-01-03-04.001 Manuale Utente
Codici prodotto
11-02-01-03-04.001
Commisioning
INSYS GSM 4.2 LOGO!
18
Dezember
06
3.3.2 Monitoring of PA Buffer (Process Image Buffer)
Command:
MONITOR?
A reply follows in the form of a PA-SMS. It contains the current states of the
utilized values in the PA buffer.
If the content of this message does not fit into one SMS, the message is
automatically divided into multiple (up to 3) SMS messages.
The LOGO! PA buffer scan is attempted up to three times, if necessary. If still no
reply is received from LOGO!, an SMS containing the text “NO SUCCESS” will be
transmitted instead of the PA-SMS.
A callback number (“CN: “) must be specified.
MONITOR?
A reply follows in the form of a PA-SMS. It contains the current states of the
utilized values in the PA buffer.
If the content of this message does not fit into one SMS, the message is
automatically divided into multiple (up to 3) SMS messages.
The LOGO! PA buffer scan is attempted up to three times, if necessary. If still no
reply is received from LOGO!, an SMS containing the text “NO SUCCESS” will be
transmitted instead of the PA-SMS.
A callback number (“CN: “) must be specified.
3.3.3 Reading Out the Actual Values
Command:
BLOCK<blocknumber1>[,<blocknumber2>[,<blocknumber3>]]?
The block numbers must always be specified with three digits.
A reply follows containing the actual values of the desired function blocks.
The actual values of up to three function blocks can be scanned for each SMS.
The scan of actual values on LOGO! is attempted up to three times, if necessary. If
still no reply is received from LOGO!, an SMS containing the text NO SUCCESS
will be transmitted instead of the actual-value SMS.
A callback number (“CN: “) must be specified.
A one-time configuration of the INSYS GSM 4.2 LOGO! is also required in order to
assign function and block numbers to the device.
BLOCK<blocknumber1>[,<blocknumber2>[,<blocknumber3>]]?
The block numbers must always be specified with three digits.
A reply follows containing the actual values of the desired function blocks.
The actual values of up to three function blocks can be scanned for each SMS.
The scan of actual values on LOGO! is attempted up to three times, if necessary. If
still no reply is received from LOGO!, an SMS containing the text NO SUCCESS
will be transmitted instead of the actual-value SMS.
A callback number (“CN: “) must be specified.
A one-time configuration of the INSYS GSM 4.2 LOGO! is also required in order to
assign function and block numbers to the device.