Insys GSM LOGO 4.2 Compact 11-02-01-03-04.001 Manuale Utente
Codici prodotto
11-02-01-03-04.001
INSYS GSM 4.2 LOGO!
Commisioning
Dezember 06
21
3.3.4 Status Scan of LOGO!
3.3.4.1 Scanning Status
Command: STATUS?
A reply follows indicating the status of LOGO!
The LOGO! status scan is attempted up to three times, if necessary. If still no reply
is received from LOGO!, an SMS containing the text NO SUCCESS will be
transmitted instead of the status SMS.
A callback number (“CN: “) must be specified.
The format of the reply is as follows:
STATUS: <logo-status>
<logo-status>:
A reply follows indicating the status of LOGO!
The LOGO! status scan is attempted up to three times, if necessary. If still no reply
is received from LOGO!, an SMS containing the text NO SUCCESS will be
transmitted instead of the status SMS.
A callback number (“CN: “) must be specified.
The format of the reply is as follows:
STATUS: <logo-status>
<logo-status>:
RUN
STOP/
REMOTE
PARAM
Status Meaning
RUN
RUN
LOGO! is in RUN mode
STOP/
REMOTE
REMOTE
LOGO! is in STOP mode; when an
INSYS GSM 4.2 is interfaced, REMOTE
is always signaled as well because the
serial interface is connected
INSYS GSM 4.2 is interfaced, REMOTE
is always signaled as well because the
serial interface is connected
PARAM
LOGO! is in parameter assignment
mode
mode
NO SUCCESS INSYS GSM 4.2 message:
- LOGO! did not reply (cable not
connected, etc.)
- LOGO! is in programming
mode