DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC Scheda Tecnica

©

 2014 DJI. All Rights Reserved. 

Flight

INSPIRE 1

  User Manual

3.  Hold the aircraft vertically with nose pointing downward, and rotate it 360 degrees around the center 

axis. Recalibrate the compass if the Aircraft Status Indicator show solid red.

If the Aircraft Status Indicator blinks red and yellow after the calibration, move your aircraft to a 

different location to carry out compass calibration.

Calibrate the compass before each flight.  Launch DJI Pilot App, follow the on-screen instruction 

to calibrate the compass.

When to Recalibrate

1.  When compass data is abnormal, and the Aircraft Status Indicator is blinking red and yellow.

2.  When flying in a new location, or a location that is different from your last flight. 

3.  When the mechanical structure of the Inspire 1 has changed, i.e. changed mounting position of the 

compass.

4.  When severe drifting occurs in flight, i.e. the Inspire 1 does not fly in straight lines.

Auto Take-off and Auto Landing

Auto Take-off

Use auto take-off to take off your aircraft automatically if the Aircraft Status Indicator  displays blinking 

green. Follow the steps below to use auto take-off:

1. Launch DJI Pilot app, enter “Camera” page. 

2. Ensure the aircraft is in “P” mode.

3. Go through the pre-flight checklist. 

4. Tap“ ”, and confirm flight condition. Slide to confirm and take-off. 

5. Aircraft takes off and hovers at 1.5 meters above ground.