Samsung CLX-6200FX Dépliant

Troubleshooting_ 83

If the amount of background shading becomes 

unacceptable:

•

Change to a lighter weight paper. See 

page 33.

•

Check the machine’s environment: very dry 

(low humidity) or high humidity (higher than 

80% RH) conditions can increase the 

amount of background shading.

•

Remove the old toner cartridge and install 

a new one. See page 65.

•

Clean the inside of the machine. See page 

•

Check the paper type and quality. See page 

•

Remove the toner cartridge and install a 

new one. See page 65.

If marks repeatedly appear on the printed side 

of the page at even intervals:

•

The toner cartridge may be damaged. If a 

repetitive mark occurs on the page, print a 

cleaning sheet several times to clean the 

cartridge. After the printout, if you still have 

the same problems, remove the toner 

cartridge and install a new one. See page 

65.

•

Parts of the machine may have toner on 

them. If the defects occur on the back of 

the page, the problem will likely correct 

itself after a few more pages.

•

The fusing assembly may be damaged. 

Contact a service representative.

Background scatter results from bits of toner 

randomly distributed on the printed page. 

•

The paper may be too damp. Try printing 

with a different batch of paper. Do not open 

packages of paper until necessary so that 

the paper does not absorb too much 

moisture.

•

If background scatter occurs on an 

envelope, change the printing layout to 

avoid printing over areas that have 

overlapping seams on the reverse side. 

Printing on seams can cause problems.

•

If background scatter covers the entire 

surface area of a printed page, adjust the 

print resolution through your software 

application or the printer properties.

•

If characters are improperly formed and 

producing hollow images, the paper stock 

may be too slick. Try a different paper. See 

page 33.

•

If characters are improperly formed and 

producing a wavy effect, the scanner unit 

may need service. For service, contact a 

service representative.

•

Ensure that the paper is loaded properly.

•

Check the paper type and quality. See page 

•

Ensure that the paper or other material is 

loaded correctly and the guides are not too 

tight or too loose against the paper stack.

•

Ensure that the paper is loaded properly.

•

Check the paper type and quality. Both high 

temperature and humidity can cause paper 

curl. See page 33.

•

Turn over the stack of paper in the tray. Also 

try rotating the paper 180° in the tray.

Wrinkles or creases •

Ensure that the paper is loaded properly.

•

Check the paper type and quality. See page 

•

Turn over the stack of paper in the tray. Also 

try rotating the paper 180° in the tray.

•

Check for leaking toner. Clean the inside of 

the machine. See page 62.

AaBbCc

AaBbCc

AaBbCc

AaBbCc

AaBbCc