DeTeWe Outdoor 8000 Quad Case 208048 Scheda Tecnica
Codici prodotto
208048
Outdoor 8000
Outdoor 8000
CTCSS (Continuous Tone Coded Squelch System)
The 2 digit CTCSS code corresponds to a specific tone frequency transmitted by the
radio. Two users of the same channel and CTCSS code can hear each other. You
can hear no one else who transmits on the same channel, except those who had
selected the same CTCSS code.
radio. Two users of the same channel and CTCSS code can hear each other. You
can hear no one else who transmits on the same channel, except those who had
selected the same CTCSS code.
The walkie-talkie has 38 CTCSS codes.
•
Press
twice. The CTCSS Code flashes.
•
Press
or
button to set another code.
•
Press
, to confirm the setting and return to the
Receive Mode.
•
Press to confirm and jump to next option.
Channel search
The channel search function searches in infinite loop in channels 1 to 8 as per active
signals.
signals.
•
Keep the button
pressed. Press the
button
briefly to start the scanning procedure.
•
Release the button.
•
If the active signal (in one of the 8 channels) is found, then
the channel search is interrupted and you will hear the
active signal.
active signal.
•
Press
to communicate via active channel. Press
,
continue the channel search.
Ringer
A ringer notifies the other party whether he would like to speak.
Monitor
You can search weaker signals in current channel with the Monitor function.
•
Press
and
at the same time to enable channel
monitoring.
•
Press
, to terminate monitoring.
VOX mode
The walkie-talkie is suitable for voice powered (VOX) transmissions. In VOX mode,
the radio transmits a signal if it is activated by your voice or other sound in your
vicinity. VOX mode is not recommended if you want to use your radio in a noisy or
high-wind environment.
the radio transmits a signal if it is activated by your voice or other sound in your
vicinity. VOX mode is not recommended if you want to use your radio in a noisy or
high-wind environment.
•
Press
thrice.
•
Press
, to enable VOX Function (ON) and press
again to set the VOX sensitivity, which is
indicated in the right corner of the display. Press
, till OFF appears on the display, to switch off
the VOX Function (OFF).
•
The VOX icon is displayed in VOX Mode.
•
Press
, to confirm the selection and return to
Receive Mode
.
Adjusting the ringtone
You can select 5 different ringtones.
You can select 5 different ringtones.
•
Press
four times. CA appears in the display.
•
Press
or
, to select another ringtone or
select OFF, to disable the ringtone.
•
Press
, to confirm the selection and return to the
Receive Mode.
Transmitting a ringtone
Briefly press the button.
Briefly press the button.
The ringtone is transmitted to the set channel for three
seconds.
10
Outdoor 8000
Outdoor 8000
11