Insys Modem 56k 4.1 11-02-01-01-40.028 Manuale Utente
Codici prodotto
11-02-01-01-40.028
Description
INSYS Modem 336/56k 4.1 (UL)
4.3
Bottom
Terminal
Meaning
11
OUT1NC
Output 1 normally closed
12 OUT1
Output
1
13
OUT1NO
Output 1 normally open
14
OUT2NC
Output 2 normally closed
15 OUT2
Output
2
16
OUT2NO
Output 2 normally open
17 b2
Looped-through
telephone
connection
18
b1
Phone line to network provider
19
a1
Phone line to network provider
OUT 1-NC
OUT 1
OUT 2-NC
OUT 2
OUT 2-NO
OUT 1-NO
b2
b1
a1
a2
Li
ne
20
19
11
12
13
14
15
16
17
18
11
12
13
14
15
16
17
18
19
20
20 a2
Looped-through
telephone
connection
a1 and b1 are the incoming phone lines (e.g. outside line or private branch ex-
change).
a2 and b2 are used to connect a phone in series. In idle state, they are connected
to a1 and b1 via a loop current connector. a2 and b2 are disconnected as soon as
the modem occupies the line.
For the INSYS Modem 56k 4.1 UL, the following applies:
Attention!
All devices which are connected to a1, b1, a2 and b2, must comply with the re-
quirements of UL 60950-1, Section 6. The used phone cords must have the type
AWG 26.
change).
a2 and b2 are used to connect a phone in series. In idle state, they are connected
to a1 and b1 via a loop current connector. a2 and b2 are disconnected as soon as
the modem occupies the line.
For the INSYS Modem 56k 4.1 UL, the following applies:
Attention!
All devices which are connected to a1, b1, a2 and b2, must comply with the re-
quirements of UL 60950-1, Section 6. The used phone cords must have the type
AWG 26.
4.4
User Profile
The modem offers a choice of profiles:
¾ Default factory setting:
The default factory settings enable you to achieve a fixed
defined basic state of the modem. Starting with this “ba-
sis”, you can customize the modem according to your re-
quirements.
defined basic state of the modem. Starting with this “ba-
sis”, you can customize the modem according to your re-
quirements.
¾ User profiles 0 and 1:
You can save configurations in the user profile, which may be
re-used for certain purposes.
A part of the S registry is saved in each profile. In the descrip-
tion, the affected registries are marked with an “*” in the S
registry.
re-used for certain purposes.
A part of the S registry is saved in each profile. In the descrip-
tion, the affected registries are marked with an “*” in the S
registry.
10
July 06