Insys Modem 56k 4.1 11-02-01-01-40.028 Manuale Utente

Functions 

INSYS Modem 336/56k 4.1 (UL) 

 

19  Juli 

06 

If the modem configuration was adjusted to certain user 
requirements, these settings can be saved in the user pro-
files 0  

or 1. 

Configuration changes will be lost after a RESET or restart 
if they were not saved before. 

For each received AT command, the modem automati-
cally performs an adjustment to the set baud rate, the 
number of data and stop bits, and the parity. 
The adjustment to the transmission speed on the phone 
line is performed automatically, unless the settings say 
otherwise. During the establishing of a connection both 
modems attempt to achieve the joint fastest speed on 
the phone line. 

For an existing connection, the modem must first switch 
to command mode. 
 
You will receive the transmission settings … 
 
E.g.: +MS: V92,1,300,48000,300,56000 
 
This means that a connection between 300 and 56000 
bps was established, preferably according to V.92, de-
pending on the line quality and the abilities of the re-
mote terminal. 
 
Query the quality of an existing connection 
 
Query the level of an existing connection 
 
Display the connection statistics after the connection is 
terminated