Insys Modem 56k 4.1 11-02-01-01-40.028 Manuale Utente
Codici prodotto
11-02-01-01-40.028
INSYS Modem 336/56k 4.1 (UL)
AT Command Set
8.1
Overview AT Commands
Command
Description
AT**
Start of the flash load function
ATA
Answer mode
The modem is switched into response mode. This is only effective in Germany, if the con-
nected phone goes off-hook or if a call comes in.
nected phone goes off-hook or if a call comes in.
A/
Repeat the last command
The last command is repeated.
AT\A<n>
Select maximum MNP block size
Define maximum block size for error corrected MNP transmissions.
AT\A0
64
byte
AT\A1
128
byte
(default)
AT\A2
192
byte
AT\A3
256
byte
AT*A<n>
Automatic call acceptance ON/OFF
AT*A0
Call acceptance is blocked, irrespective of S0
AT*A1
Call acceptance according to S0 (default)
Note: see also S-Registry 36, bit 7
AT&A<n>
Selective Call Answer On or Off
To evaluate selective call answer, the phone number must be transmitted (CLIP). The
following countries support the “CLIP” function:
following countries support the “CLIP” function:
Australia, Belgium, China, Denmark, Germany, Finland, Great Britain, Hong Kong, India,
Ireland, Iceland, Italy, Canada, Korea, New Zealand, The Netherlands, Norway, Austria,
Sweden, Singapore, Spain, Taiwan, USA.
Ireland, Iceland, Italy, Canada, Korea, New Zealand, The Netherlands, Norway, Austria,
Sweden, Singapore, Spain, Taiwan, USA.
AT&A1
Switches the selective call answer ON
AT&A0
Switches the selective call answer OFF (default)
The AT&A setting is saved in AT&W.
AT%A<n>
Send alarm text manually
Manual triggering of the message. After the message is sent, the device responds with OK
(success) or ERROR (failure).
Note: see also AT*V<n>
(success) or ERROR (failure).
Note: see also AT*V<n>
July 06
47