ConiuGo 700100107 EasyGuard II 700100107 Manuale Utente
Codici prodotto
700100107
15
Revision 9.0
GSM Alarm & Telemetry systems
definition for an allowed or not allowed range of the signal. (e.g. by a tem-
perature sensor). Is the signal within that range there is indicated a “1”, if
outside the range a “0”.
•
Analog meassurement 1 – 4
As soon as the the sensors are connected to the module and the settings
are done correctly the module will display the actual results of the parame-
ter that is measured.
•
Power
With this parameter the module displays at which power supply the module
operates. Sup. Indicates the normal power supply, Accu shows that the
module is working from a connected accumulator.
•
GSM
Indicates whether the module is able to find a GSM network or not.
•
Operator
By reset of the module here no provider is displayed. An "ERROR" appears.
Only if the module has a succesfull booking into the GSM network the name
of the provider will be shown.
Until the first entering of the PIN number it is not possible to
connect to the provider which causes an „Operator: ERROR”.
•
Signal quality
The signal quality is a very important criterion running the GSM module. For
sending of SMS the signal quality should exceed a minimum of 16 to send
the SMS. Otherwise a delay in sending SMS or no sending of SMS may oc-
cur. The maximum indication for signal quality is 31.
Possible answers:
#SIGNAL?
The signal quality could not read out because the system is not
booked in into the network of a GSM provider.
#BAD SIGNAL
The signal quality is bad and smaller then 8.