ConiuGo 700100107 EasyGuard II 700100107 Manuale Utente
Codici prodotto
700100107
31
Revision 9.0
GSM Alarm & Telemetry systems
of it. Here you will find different possibilities to customize the current settings and you
can enter in which format the current System Status will be sent to which phone
number. Inputs which has no name will not be sended in this status SMS!
This function allows the system to send the actual system status of the inputs as
result of an event like incoming SMS or special times.
If you choose this option you will see a list of possible sending settings.
Choose one of the settings which you will customize to your needs. The new screen
shows you the different options to modify the status message. Here you could set in
which kind the message will be send to the predefined number.
Send System Status
----------------
Name:
----------------
Name:
Send Status 0
Telefonnummer:
+49177.......
E-Mail:
Long Sms:
Yes
Digital Inputs:
No
Analog Inputs:
Yes
Incoming Sms:
No
Gsm Network:
No
Power Status:
Yes
Time frames:
No
<1> Name
<2> Phone number
<3> Send condition
<4> Email
Your selection:
<1a> Name
Here you can change the standard name of the status to handle it easier in further
settings.
<1b> Phone number
You are able to set a target number for the message which transfers the system
status.
<1d> Send condition
You can choose between sending long or short SMS. As well it is possible to select
the data that will be transfered in the message. By sending “long SMS” the status
data and names are transmitted as numbers. Using “short SMS” only the status of