ConiuGo 700100107 EasyGuard II 700100107 Manuale Utente
Codici prodotto
700100107
34
Revision 9.0
GSM Alarm & Telemetry systems
which the GSM module stays in the connection after it is established. After that the
dial time is over the module will hang up automatically. If – during a modem connec-
tion is active – a voice or data connection is activated again the GSM module at first
will end the connection that currently is active. Additional you have the feature to limit
the time for the voice or modem connection.
<3> Digital Outputs:
These are the relais contacts on the module. With this option you could
change the name of the contact. This is really helpful later when you com-
bine the events with the actions.
You get an overview about all 4 digital outputs
and their names.
Please note that it could be dangerous to trigger connected
units (e.g. heaters or coolers) because of the possible lost of the
connection to the GSM networks.
<4> Outgoing SMS:
When you choose this function you see the list of all outgoing SMS. Here you config-
ure those SMS that have to be sent at a defined event. Select the outgoing SMS you
wish to set up or change. So you can define the accompanying parameters.
Modify Outgoing SMS
----------------
NAME:
----------------
NAME:
SMS_1
TEXT:
Test Sms
Phone number 1:
Phone number 2:
Phone number 3:
Phone number 4:
Receipt: 0 Maintenance: 0 Multi call: inactiv
<1> Name
<2> Text
<3> Phone number
<4> Receipt
<5> Maintenance
<6> Multi call status
<0> Back
Your selection:
Phone number 2:
Phone number 3:
Phone number 4:
Receipt: 0 Maintenance: 0 Multi call: inactiv
<1> Name
<2> Text
<3> Phone number
<4> Receipt
<5> Maintenance
<6> Multi call status
<0> Back
Your selection:
<4a> Name