Emmerich ready to use 1.2 V AA ZLF 255065 Scheda Tecnica

Codici prodotto

255065

4. Performance Testing
4.1. TEST CONDITIONS

4.1.1 The battery to be tested is the product within one month after being received by customer.

4.1.2 Ambient conditions:

Temperature +20 ±5

℃

Humidity +65%±20%

4.2 Testing Tools

4.2.1 Voltage meter:

0.5 level or higher as required in IEC51/IEC485. Internal impedance exceeds 10KΩ/V.

4.2.2 Current meter:

0.5 level or higher as required in IEC51/IEC485. Internal impedance should be less than
0.01Ω/V(including wires).

4-2.3. Micrometer caliper:

With precision of 0.02mm.

4-2.4. Internal impedance meter:

Alternating current of 1000HZ, connector measuring equipment with sin wave of 4.

4-2.5: Impedance loaded meter:

Value of impedance is with +5% error allowed (including external wires).

4.2.6 Incubators Accuracy ±2℃

4.3 Test methods and benchmarks

Item Test

Method Benchmark

1．Appearance:

eyeballing

batteries shall be free from

any stains; scratches or
deformations, which may
reduce the commercial value
when visually inspected

2．Size:

caliper measurement。

The size shall comply with the

specified size as the attached
drawing

3．Insulate

impedance

measured with a Megger overpack

and battery electrode between the
degree of insulation。

outer sleeve shall exceed 10

MΩ。

4．Weight

using disk-scale measurement。

approximate 12.0 g。

5．Charge

Voltage

Following a period of discharge at

0.2CmA down to a terminal voltage
of 1.0V, standard charge, the cell or
battery shall be checked at 5 minutes
before finish charging。

The voltage shall be less than

1.6 V。

6．Open circuit
voltage: (O.C.V.)

Following a standard charge period,

the open circuit voltage of the cell or
battery shall be checked within 1
hour.。

The O.C.V. shall exceed 1.25

V per cell.。

7．Closed
circuit voltage:

Following a standard charge period,

the closed circuit voltage of the cell

The C.C.V. shall exceed 1.2

V per cell 。

Think more, do better ！