Texas Instruments IC MCU 16B MSP430G2202IN20 PDIP-20 TID MSP430G2202IN20 Scheda Tecnica
Codici prodotto
MSP430G2202IN20
MSP430G2x32
MSP430G2x02
MSP430G2x02
SLAS723H – DECEMBER 2010 – REVISED MAY 2013
MIXED SIGNAL MICROCONTROLLER
1
FEATURES
23
•
Low Supply Voltage Range: 1.8 V to 3.6 V
•
Up to 16 Capacitive-Touch Enabled I/O Pins
•
Ultra-Low Power Consumption
•
Universal Serial Interface (USI) Supporting SPI
and I2C
and I2C
–
Active Mode: 220 µA at 1 MHz, 2.2 V
•
10-Bit 200-ksps Analog-to-Digital (A/D)
–
Standby Mode: 0.5 µA
Converter With Internal Reference, Sample-
–
Off Mode (RAM Retention): 0.1 µA
and-Hold, and Autoscan (MSP430G2x32 Only)
•
Five Power-Saving Modes
•
Brownout Detector
•
Ultra-Fast Wake-Up From Standby Mode in
•
Serial Onboard Programming,
Less Than 1 µs
No External Programming Voltage Needed,
•
16-Bit RISC Architecture, 62.5-ns Instruction
Programmable Code Protection by Security
Cycle Time
Fuse
•
Basic Clock Module Configurations
•
On-Chip Emulation Logic With Spy-Bi-Wire
–
Internal Frequencies up to 16 MHz With
Interface
Four Calibrated Frequencies
•
Family Members are Summarized in
–
Internal Very-Low-Power Low-Frequency
•
Package Options
(LF) Oscillator
–
TSSOP: 14 Pin, 20 Pin
–
32-kHz Crystal
–
PDIP: 20 Pin
–
External Digital Clock Source
–
QFN: 16 Pin
•
One 16-Bit Timer_A With Three
•
For Complete Module Descriptions, See the
Capture/Compare Registers
MSP430x2xx Family User’s Guide (
)
DESCRIPTION
The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consist of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The
MSP430G2x32
and
MSP430G2x02
series
of
microcontrollers
are
ultra-low-power
mixed
signal
microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in
communication capability using the universal serial communication interface. The MSP430G2x32 series have a
10-bit A/D converter. For configuration details, see
communication capability using the universal serial communication interface. The MSP430G2x32 series have a
10-bit A/D converter. For configuration details, see
. Typical applications include low-cost sensor systems
that capture analog signals, convert them to digital values, and then process the data for display or for
transmission to a host system.
transmission to a host system.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
MSP430 is a trademark of Texas Instruments.
3
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2010–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.