Texas Instruments IC MCU 16B MSP430G2201IPW14 TSSOP-14 TID MSP430G2201IPW14 Scheda Tecnica
Codici prodotto
MSP430G2201IPW14
MSP430G2x11
MSP430G2x01
MSP430G2x01
SLAS695I – FEBRUARY 2010 – REVISED FEBRUARY 2013
MIXED SIGNAL MICROCONTROLLER
1
FEATURES
2
•
Low Supply-Voltage Range: 1.8 V to 3.6 V
•
16-Bit Timer_A With Two Capture/Compare
Registers
Registers
•
Ultralow Power Consumption
•
Brownout Detector
–
Active Mode: 220 µA at 1 MHz, 2.2 V
•
On-Chip Comparator for Analog Signal
–
Standby Mode: 0.5 µA
Compare Function or Slope A/D (See
–
Off Mode (RAM Retention): 0.1 µA
•
Serial Onboard Programming,
•
Five Power-Saving Modes
No External Programming Voltage Needed,
•
Ultrafast Wake-Up From Standby Mode in Less
Programmable Code Protection by Security
Than 1 µs
Fuse
•
16-Bit RISC Architecture, 62.5-ns Instruction
•
On-Chip Emulation Logic With Spy-Bi-Wire
Cycle Time
Interface
•
Basic Clock Module Configurations
•
For Family Members Details, See
–
Internal Frequencies up to 16 MHz With
•
Available in a 14-Pin Plastic Small-Outline Thin
One Calibrated Frequency
Package (TSSOP) (PW), 14-Pin Plastic Dual
–
Internal Very Low Power Low-Frequency
Inline Package (PDIP) (N), and 16-Pin QFN
(LF) Oscillator
(RSA)
–
32-kHz Crystal
•
For Complete Module Descriptions, See the
–
External Digital Clock Source
MSP430x2xx Family User’s Guide (
)
DESCRIPTION
The Texas Instruments MSP430™ family of ultralow-power microcontrollers consists of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes, is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes, is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x01 and MSP430G2x11 series is an ultralow-power mixed signal microcontroller with a built-in
16-bit timer and ten I/O pins. The MSP430G2x11 family members have a versatile analog comparator. For
configuration details see
16-bit timer and ten I/O pins. The MSP430G2x11 family members have a versatile analog comparator. For
configuration details see
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values,
and then process the data for display or for transmission to a host system.
and then process the data for display or for transmission to a host system.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
MSP430 is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2010–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.