Texas Instruments DAC8871EVM - DAC8871EVM Evaluation Module DAC8871EVM DAC8871EVM Scheda Tecnica
Codici prodotto
DAC8871EVM
User's Guide
SLAU233 – September 2007
DAC8871 Evaluation Module
This user’s guide describes the characteristics, operation, and the use of the DAC8871 evaluation module
(EVM). It covers all pertinent areas involved to properly use this EVM board along with the devices that it
supports. The document includes the physical printed-circuit board layout, schematic diagram, and circuit
descriptions.
(EVM). It covers all pertinent areas involved to properly use this EVM board along with the devices that it
supports. The document includes the physical printed-circuit board layout, schematic diagram, and circuit
descriptions.
Related Documentation From Texas Instruments
To obtain a copy of any of the following TI documents, call the Texas Instruments Literature Response
Center at (800) 477–8924 or the Product Information Center (PIC) at (972) 644–5580. When ordering,
identify this manual by its title and literature number. Updated documents can also be obtained through
the TI Web site at
Center at (800) 477–8924 or the Product Information Center (PIC) at (972) 644–5580. When ordering,
identify this manual by its title and literature number. Updated documents can also be obtained through
the TI Web site at
Data Sheet
Literature Number
DAC8871
REF102
OPA211
OPA277
OPA4227
INA105
Questions about this or other data converter EVMs?
If you have questions about this or other Texas Instruments data converter evaluation modules, send
an e-mail to the Data Converter Application Team at
an e-mail to the Data Converter Application Team at
dataconvapps@list.ti.com
. Include in the subject
heading the product in which you are interested.
Contents
1
EVM Overview
2
PCB Design and Performance
3
EVM Operation
List of Figures
1
Block Diagram
2
Top Silkscreen
3
Layer 1, Top Signal Plane
4
Layer 2, Bottom Signal Plane
5
Bottom Silkscreen
6
Drill Drawing
7
INL and DNL Characteristic Plot
8
DAC8871 EVM Default Jumper Configuration
List of Tables
1
Bill of Materials
2
Factory Default Jumper Setting
3
Digital Control Interface Signal Mapping for J2/P2 Header/Socket Connectors
C5000, C6000 are trademarks of Texas Instruments.
SPI is a trademark of Motorola, Inc.
LabVIEW is a trademark of National Instruments Corporation.
SPI is a trademark of Motorola, Inc.
LabVIEW is a trademark of National Instruments Corporation.
SLAU233 – September 2007
DAC8871 Evaluation Module
1