Texas Instruments IC MCU 16B MSP430F235TPM LQFP-64 TID MSP430F235TPM Scheda Tecnica
Codici prodotto
MSP430F235TPM
MSP430F23x
MSP430F24x(1)
MSP430F2410
MSP430F24x(1)
MSP430F2410
SLAS547I – JUNE 2007 – REVISED DECEMBER 2012
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
DESCRIPTION
The Texas Instruments MSP430™ family of ultra-low power microcontrollers consists of several devices featuring
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes, is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less
than 1 µs.
different sets of peripherals targeted for various applications. The architecture, combined with five low-power
modes, is optimized to achieve extended battery life in portable measurement applications. The device features a
powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.
The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less
than 1 µs.
The MSP430F23x, MSP430F24x(1), and MSP430F2410 series are microcontroller configurations with two built-
in 16-bit timers, a fast 12-bit A/D converter (not MSP430F24x1), a comparator, four (two in MSP430F23x)
universal serial communication interface (USCI) modules, and up to 48 I/O pins. The MSP430F24x1 devices are
identical to the MSP430F24x devices, with the exception that the ADC12 module is not implemented. The
MSP430F23x devices are identical to the MSP430F24x devices, with the exception that a reduced Timer_B, one
USCI module, and less RAM are integrated.
in 16-bit timers, a fast 12-bit A/D converter (not MSP430F24x1), a comparator, four (two in MSP430F23x)
universal serial communication interface (USCI) modules, and up to 48 I/O pins. The MSP430F24x1 devices are
identical to the MSP430F24x devices, with the exception that the ADC12 module is not implemented. The
MSP430F23x devices are identical to the MSP430F24x devices, with the exception that a reduced Timer_B, one
USCI module, and less RAM are integrated.
Typical applications include sensor systems, industrial control applications, and hand-held meters.
Table 1. Available Options
PACKAGED DEVICES
(1) (2)
T
A
PLASTIC 64-PIN QFP (PM)
PLASTIC 64-PIN QFN (RGC)
MSP430F233TPM
MSP430F233TRGC
MSP430F235TPM
MSP430F235TRGC
MSP430F247TPM
MSP430F247TRGC
MSP430F2471TPM
MSP430F2471TRGC
-40°C to 105°C
MSP430F248TPM
MSP430F248TRGC
MSP430F2481TPM
MSP430F2481TRGC
MSP430F249TPM
MSP430F249TRGC
MSP430F2491TPM
MSP430F2491TRGC
MSP430F2410TPM
MSP430F2410TRGC
(1)
For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI web site at
of this document, or see the TI web site at
(2)
Package drawings, thermal data, and symbolization are available at
.
Development Tool Support
All MSP430 microcontrollers include an Embedded Emulation Module (EEM) allowing advanced debugging and
programming through easy to use development tools. Recommended hardware options include the following:
•
programming through easy to use development tools. Recommended hardware options include the following:
•
Debugging and Programming Interface
–
–
MSP-FET430UIF (USB)
–
MSP-FET430PIF (Parallel Port)
•
Debugging and Programming Interface with Target Board
–
–
MSP-FET430U64 (PM package)
•
Standalone Target Board
–
–
MSP-TS430PM64 (PM package)
•
Production Programmer
–
–
MSP-GANG430
2
Copyright © 2007–2012, Texas Instruments Incorporated