Microchip Technology MA330026 Scheda Tecnica
2011-2014 Microchip Technology Inc.
DS70000652F-page 217
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
19.0
10-BIT ANALOG-TO-DIGITAL
CONVERTER (ADC)
CONVERTER (ADC)
The dsPIC33FJ16(GP/MC)101/102 and
dsPIC33FJ32(GP/MC)101/102/104 devices have up to
14 ADC module input channels.
dsPIC33FJ32(GP/MC)101/102/104 devices have up to
14 ADC module input channels.
19.1
Key Features
The 10-bit ADC configuration has the following key
features:
features:
• Successive Approximation (SAR) conversion
• Conversion speeds of up to 1.1 Msps
• Up to 14 analog input pins
• Four Sample-and-Hold (S&H) circuits for
simultaneous sampling of up to four analog input
pins
pins
• Automatic Channel Scan mode
• Selectable conversion trigger source
• Selectable Buffer Fill modes
• Four result alignment options (signed/unsigned,
fractional/integer)
• Operation during CPU Sleep and Idle modes
• 16-word conversion result buffer
Depending on the particular device pinout, the ADC
can have up to 14 analog input pins.
can have up to 14 analog input pins.
Block diagrams of the ADC module are shown in
.
19.2
ADC Initialization
To configure the ADC module:
1.
Select port pins as analog inputs
(AD1PCFGL<15:0>).
(AD1PCFGL<15:0>).
2.
Select the analog conversion clock to match the
desired data rate with the processor clock
(ADxCON3<7:0>).
desired data rate with the processor clock
(ADxCON3<7:0>).
3.
Determine how many Sample-and-Hold
channels will be used (ADxCON2<9:8>).
channels will be used (ADxCON2<9:8>).
4.
Select the appropriate sample and conver-
sion sequence (ADxCON1<7:5> and
ADxCON3<12:8>).
sion sequence (ADxCON1<7:5> and
ADxCON3<12:8>).
5.
Select the way conversion results are presented
in the buffer (ADxCON1<9:8>).
in the buffer (ADxCON1<9:8>).
6.
Turn on the ADC module (ADxCON1<15>).
7.
Configure the ADC interrupt (if required):
a)
Clear the ADxIF bit.
b)
Select the ADC interrupt priority.
Note 1: This data sheet summarizes the features
of the dsPIC33FJ16(GP/MC)101/102 and
dsPIC33FJ32(GP/MC)101/102/104 family
devices. It is not intended to be a compre-
hensive reference source. To complement
the information in this data sheet, refer
to
dsPIC33FJ32(GP/MC)101/102/104 family
devices. It is not intended to be a compre-
hensive reference source. To complement
the information in this data sheet, refer
to
“Analog-to-Digital Converter
(ADC)” (DS70183) in the “dsPIC33/
PIC24 Family Reference Manual”, which
is available from the Microchip web site
(
PIC24 Family Reference Manual”, which
is available from the Microchip web site
(
www.microchip.com
).
2: Some registers and associated bits
described in this section may not be
available on all devices. Refer to
available on all devices. Refer to
in
this data sheet for device-specific register
and bit information.
and bit information.