Microchip Technology AC244045 Scheda Tecnica
Optional Debug Headers
2006-2012 Microchip Technology Inc.
DS51292U-page 53
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 8:
DIMENSIONS – AC162078
M
18-Pin Target Pin 1 Located
on Bottom side of Header
on Bottom side of Header
Dimensions are in inches
Top
28-Pin Target Pin 1 Located
on Bottom side of Header
on Bottom side of Header
Side
0.062 Typical
0.560
Typical
0.165 Typical
2.300
0.950
0.410
0.300
0.150
2.050
6-pin Modular Connector
See “Debug Header Connec-
tions” for details.
tions” for details.
ICE Device