Microchip Technology MCP46XXEV Manuale Utente
MCP46XXEV Evaluation Board User’s Guide
DS51929A-page 12
© 2010 Microchip Technology Inc.
2.2
FEATURES
The MCP46XXEV Evaluation Board has the following features:
• MCP4661-103E/ST is installed
• 0
Ω resistors connect MCP4661 V
DD
and V
SS
signals to the appropriate power or
ground plane (see Figure 2-2)
• 0
Ω resistors connect MCP4661’s Resistor Network 0 A terminal signal to power
plane, resistor network is in a voltage divider configuration
(see Figure 2-2)
(see Figure 2-2)
• 0
Ω resistors connect MCP4661’s Resistor Network 0 B terminal signal to ground
plane, resistor network is in a voltage divider configuration
(see Figure 2-2)
(see Figure 2-2)
• Through-hole connection terminal (orange) for all wiper pins
• Connection terminal points for all device pins
(either through-hole or surface-mount)
• Footprints for optional passive components (SMT 805 footprint) for:
- Power supply filtering (C
1
and C
2
footprints)
- Device bypass capacitor (RxD footprint for device pin connected to V
DD
)
• Silk-screen area to write specifics of implemented circuit (on back of PCB), such
as MCP4661 10 k
Ω
• PICkit Serial Analyzer Header
The included TSSOP20EV Board has the following features:
• Connection terminals may be either through-hole or surface-mount
• Three package type footprints supported:
- TSSOP-20
- TSSOP-14
- TSSOP-8
- SSOP-20
- DIP-20 (600 mil body)
• Footprints for optional passive components (SMT 805 footprint) for:
- Power supply filtering (C
1
and C
2
footprints)
- Device bypass capacitor (RxD footprint for device pin connected to V
DD
)
- Output filtering (RxD footprint)
- Output pull-up resistor (RxU footprint)
- Output pull-down resistor (RxD footprint)
- Output loading resistor (RxD footprint)
• Silk-screen area to write specifics of implemented circuit (on back of PCB), such
as MCP4661 10 k
Ω
• PICkit Serial Analyzer / PICkit 2 Programming (ICSP™) Header