Microchip Technology MA180021 Manuale Utente
© 2007 Microchip Technology Inc.
DS51678A-page 17
PIC18F87J50 FS USB
PLUG-IN MODULE
USER’S GUIDE
Chapter 4. Demo Code/Reference Firmware
To assist in the development of USB applications, Microchip provides a number of
demonstration firmware projects (such as HID, CDC, etc.), and other support materials,
such as application notes. The USB demonstration projects use the same basic USB
framework, which is referred to as the “MCHPFSUSB Firmware”. Documentation for
this firmware can be found in the “MCHPFSUSB Firmware User’s Guide” (DS51679).
The firmware projects are contained in an executable setup file which can be found
either on the CD-ROM disc, which distributes with the PIM, or at the Microchip USB
design center:
http://www.microchip.com/usb
Once the MCHPFSUSB Firmware has been installed, the MPLAB
demonstration firmware projects (such as HID, CDC, etc.), and other support materials,
such as application notes. The USB demonstration projects use the same basic USB
framework, which is referred to as the “MCHPFSUSB Firmware”. Documentation for
this firmware can be found in the “MCHPFSUSB Firmware User’s Guide” (DS51679).
The firmware projects are contained in an executable setup file which can be found
either on the CD-ROM disc, which distributes with the PIM, or at the Microchip USB
design center:
http://www.microchip.com/usb
Once the MCHPFSUSB Firmware has been installed, the MPLAB
®
IDE project contain-
ing the source code and hex file for the HID class, mouse like demonstration firmware,
that comes preprogrammed on the PIC18F87J50, can be found in the following
directory:
C:\MCHPFSUSB\fw\HID\Mouse
By default, the MPLAB IDE projects are configured to work with the PICDEM™ FS USB
Demo Board, which uses the PIC18F4550 microcontroller. Refer to the MCHPFSUSB
Firmware release notes for details on how to switch the projects over for use with the
PIC18F87J50.
that comes preprogrammed on the PIC18F87J50, can be found in the following
directory:
C:\MCHPFSUSB\fw\HID\Mouse
By default, the MPLAB IDE projects are configured to work with the PICDEM™ FS USB
Demo Board, which uses the PIC18F4550 microcontroller. Refer to the MCHPFSUSB
Firmware release notes for details on how to switch the projects over for use with the
PIC18F87J50.