Insys GSM Small 11-02-01-03-02.001 Manuale Utente
Codici prodotto
11-02-01-03-02.001
6. Function Description
29
6.3.2 Automatic PIN Input and Registering After Restart
AT^SCFG="AutoExec",1,1,0,0,"AT+COPS=0","000:00:06"
AT^SCFG="AutoExec",1,1,1,0,"AT+CPIN=0000","000:00:10"
Meaning: 6 seconds after a restart/reset, the command AT+COPS=0 is automatically
executed to allow the engine to automatically register itself at the GSM network after
the PIN input.
This is indicated at the serial interface:
^SCFG: "AutoExec",1,1,0,0,"AT+COPS=0"
4 seconds later - that is 10 seconds after a restart/reset - the PIN is sent to the SIM card
(here 0000) with the command AT+CPIN=... .
This is indicated at the serial interface:
^SCFG: "AutoExec",1,1,1,0,"AT+CPIN=0000"
After this sequence the INSYS GSM small is registered at the network.
The settings can be deactivated by entering the following:
AT^SCFG=“AutoExec“,0,1,0
AT^SCFG=“AutoExec“,0,1,1
Attention! The settings of this command are only stored with the command AT^SMSO.
The PIN input can be traced via the serial interface.
For time-controlled functions, the internal timers start from the beginning after a restart
or a reset. This also applies if ATZ or AT&F are entered!
Version 1.00 / 09.04