Timex Watch (T2P277) T2P277 Scheda Tecnica

The temperature sensor is always on and will take a 

 reading at least once every 60 seconds. The temperature 

is indicated by the lower hand and accompanying scale.
When worn on wrist, temperature reading is affected by 

body heat. For more accurate readings, remove watch 

from wrist.
DEPTH SEnSor on/oFF 

The sensor is normally off, and must be turned on 

 manually prior to submersion. Push and release button B 

to turn the sensor on. The 4th center hand will move from 

the OFF (6 o’clock) position to the 12 o’clock position and 

begin to take readings at least once every 5 seconds. As 

the depth increases, the 4th center hand will point to 

the actual depth as indicated on the depth scale. If the 

readings remain in the range of 0 to 2 meters (0-6 feet) 

for 5 minutes, the sensor will automatically turn off. To 

turn the sensor off manually, press and hold button B 

for 2 seconds. The 4th center hand will move to the OFF 

(6 o’clock) position.
rECALL MAXIMuM DEPTH/MInIMuM TEMPErATurE

After coming to the surface, unscrew the crown and pull 

to the middle position. The center and lower hands will 

move to display the maximum depth value and the mini-

mum temperature value, respectively, recorded during the 

most recent descent. When the depth sensor is activated 

again, the memory will be cleared.
If the watch has not yet been used, then the center and 

lower hands shall move to display 0 meters/feet and 

0ºC/32 ºF, respectively. The crown must be screwed back 

in prior to use/submersion.