Omnitronic HS-1100 XLR Headset microphone 13056035 Manuale Utente

00031358.DOC, Version 2.0

8/14

1)  Insert the microphone arm in the left or right suspension on the
wireframe.
2)  Place the headset wireframe around the head so that the wireframe is
horizontal across the back of the head and the ends of the wireframe fit over
and in front of the ears.
3)  For maximum gain before feedback, position the gooseneck so that the
microphone grille is within 25 mm (1 inch) of the left corner of the mouth. Do
NOT position it directly in front of the mouth.
4)  Connect the connection cable with the pocket transmitter.
5)  If breath noise or “pop noise” is audible over the sound system, install the
supplied windscreen.

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

Type:

Condenser microphone

Directivity pattern:

Cardioid

Frequency response: 50-18,000 Hz
Sensitivity:

-55 dB (± 3 dB)

Impedance:

1.5 k

Ω (± 30 %)

Power supply:

1.5-10 V DC

Current consumption: approx. 0.5 mA
Connection:

3-pin mini XLR plug

Cable length:

approx. 1.2 m

Dimensions:

250 x 120 x 150 mm

Weight:

10 g