Raspberry Pi ® rb-LK-SET Mini PC ARM1176JZFS (1x 700 MHz) 512 MB rb-LK-SET Manuale Utente
Codici prodotto
rb-LK-SET
Description
This is a Linker kit base shield for Raspberry Pi with ADC interface. All the Linker kit
modules can be plugged onto Raspberry Pi through this base shield. Moreover, this shield has
an on-board ADC chip so that analog output modules can be used on Raspberry Pi. The ADC
chip used is MCP3004. It talks to Raspberry Pi using SPI interface.
modules can be plugged onto Raspberry Pi through this base shield. Moreover, this shield has
an on-board ADC chip so that analog output modules can be used on Raspberry Pi. The ADC
chip used is MCP3004. It talks to Raspberry Pi using SPI interface.
Specification
There are 8 4-pin 2.54mm spacing housing on the base shield:
JP1: A0, A1, VCC, GND.
JP2: A2, A3, VCC, GND.
JP3: SCL, SDA, VCC, GND.
JP4: RXD, TXD, VCC, GND.
JP5: P17, P18, VCC, GND.
JP6: P27, P22, VCC, GND.
JP7: P23, P24, VCC, GND.
JP8: P24, P4, VCC, GND.
These connectors cover Analog, I2C, and GPIO.
Install Base Shield on Raspberry Pi