Axxatronic CBRPI-BA-BLU Mini PC CBRPI-BA-BLU Scheda Tecnica

Codici prodotto

CBRPI-BA-BLU

raspBerry pi

STYLE ENCLOSURES

universal

enclosures

hand

held

cases

heavy

duty

enclosures

din

rail

Boxes

interface

supports

control

stations

diecast

& metal

Boxes

desktop &

instrument

cases

potting

Boxes

19"

enclosures

19"

suBracks

custom

sized

enclosures

custom

services

Carbon Fibre Lilac Purple

Fitting of the PCB, Light Pipe and Enclosure Assembly

1. Place your Raspberry Pi enclosure base onto a steady surface.

2. Tilting your Raspberry Pi at 45° angle, align the audio and RCA video ports with the machined
holes in the base and push until the PCB clips into the PCB groove.

(If you are not fitting the Light pipe skip to step 8, if you are fitting the Light pipe,

continue to step 4)

4. Place your Raspberry Pi top onto a steady surface.

5. Peel off the protective film on the light pipe.

6. Apply one drop of glue onto the smaller end of the recess and two drops of glue onto the other end of the
light pipe location recess. (We recommend using Everbuild Stick 2 All Purpose Superglue)

7. Ensuring that the light pipe is in the correct orientation as shown, place into the recess and hold for five
seconds ensuring that the light pipe is perpendicular to the enclosure top.

8. Hold the base in one hand (Thumb on the audio connector, fingers over the HDMI connector) Place the top
cover at a 45° angle (Aligning USB connector with USB cut-out) clip over the USB and LAN connectors. Then
clip the opposite end of the top onto the base.

9. Peel off the protective film on both the top and base of your enclosure. Push the supplied feet into place if
required.

3. Push the opposite side of the PCB down so that it clips into the second PCB groove in the base.

Light Pipe Assembly

Enclosure Assembly

PCB Assembly