Insys Modem 56k small INT 2.0 11-02-01-01-43.003 Manuale Utente

INSYS Modem 56k small INT 2.0/USB 1.0 

Initial Operation 

June 06 

15 

 

After the second installation has been completed, the system has a new COM port avail-
able. You can check the installation by opening the device manager in the start menu at  
Control Panel ->System -> Hardware -> Device Manager 
 

 
In this example, the modem was installed at 
COM port 4. The modem can now only be ad-
dressed via this COM port, using the configura-
tion software HSComm, for example. 
For many applications, the installation up to 
this point is sufficient.  
 
If the modem is supposed to appear as a mo-
dem in the control panel as well (e.g. to setup a 
RDT - remote data transmission - connection), 
you must install an additional modem driver to 
ensure the functioning of the installed COM 
port. The following Chapter will show the de-
tails.