Keysight Technologies U2941A Added tester for U2722A U2941A Scheda Tecnica

Data Sheet

  

Closed lid minimizes ESD on

 

sensitive circuits and components

  

Up to 3 source/measure channels

 

supported

  

Different socket modules to match
a wide variety of pin configurations

  

Assembly Teflon plate for low-
current measurements

  

Bundled Agilent Parametric 
Measurement Manager software 
eases set-up, testing and data 
recording

The Agilent U2941A parametric test fixture is designed to complement usage of the Agilent
U2722A USB modular source measure unit in the testing of semiconductor components, including
SMT and DIP ICs.

The bundled Agilent Parametric Measurement Manager software also supports the Agilent
U2751A USB modular switch matrix when used with the U2722A.

Figure 1: Sample setup of the U2941A connected directly to the U2722A source

measure unit, and fastened with the DIP socket module.

Figure 2: Socket modules are interchangeable to match pin configuration of

device-under-test (DUT).

Black plastic fasteners

Socket module