Testo ComSoft 3 0554 0830 Scheda Tecnica

33

Measuring
Measurement is via “Instrument/ONLINE/Start-Stop”. The
measuring rate can be set in advance via
“Instrument/ONLINE Configuration”.
The number of data which can be saved is limited, the
maximum possible duration of the measurement is shown
with the selected setting.

ONLINE data transmission from the measuring instrument
to the measurement protocol can be started, frozen or
continued. The various buttons can be accessed,
depending on the program mode.

Start: starts a new measurement. A new measurement
protocol is set up.
Stop: stops a measurement 

Displaying measured data
Measured data can be shown in diagrams or tables.
Several of these views can be shown simultaneously in
windows.
The values shown are updated constantly during
measurements.
Click on the respective symbol in the toolbar.

Saving measurement data
Measurement protocols can be copied as a file
on the hard disk of your computer for editing at
a later stage, printing or to be opened.

32

Editing readings
Managing reference data
In diagrams, it is possible to save the data just measured
with the curve of a previous measurement (reference data).
To do this, the reference protocol has to be read from the
file and assigned* to a diagram. Depending on the length of
the reference protocol (relative time scales apply in this
case...), this reference data is visible in addition to the data
from the current measurement, provided it is also shown in
the diagram.

*) determines which view is assigned which curve. Values
can be added to or exchanged in a diagram, table or scale.

Depending on the quality of the view
• 8 measurement sequences from different protocols can

be shown in diagrams  

• All of the measurement sequences of a protocol are

shown in tables

Exporting to other programs 
for further editing
Open the program parallel to Comsoft 3 to transmit data
e.g. in MS EXCEL®. Drag data from the instrument via
drag&drop over the EXCEL® button to the footnote in the
EXCEL® worksheet.
If a location is dragged to the button, all of the connected
protocols are transmitted to an EXCEL worksheet.
Data can also be transmitted to other programs which
support this function.
You can also use Copy/Paste as an alternative to
drag&drop.