Testo ComSoft 3 0554 0830 Scheda Tecnica

39

38

A folder is represented by the symbol for

A location is represented by the symbol for

A measurement protocol is represented by the symbol for

The measuring instruments which follow are then
represented by different symbols. The symbol changes if an
instrument has been opened successfully.

Work area
Your data is shown in this area.
If you copy your data from the archive to the work area, the
data will be shown. You can decide which type of display to
take.

It is possible to change the view, if so
required. Simply click on the
corresponding symbol in the toolbar.

Once you have displayed a
measurement in the work area, you
can call up a menu, in which further
settings can be carried out, by clicking
with the right mouse button in the
display:

The exact appearance of this menu
depends on the view selected.

folder 

location

protocol

Testo Comfort software has all the functions needed to
control and configure Testo measuring instruments, to
transmit data to your PC and to edit it. This Chapter
describes all the commands necessary.

Testo Comfort-Software is divided into two main parts: the
archive and the work area.

Archive
Your measuring instruments and measurement data
are managed in this area.

All of the measuring instruments are inactive when the
program starts. If you want to activate a measuring
instrument, which is connected, click twice on the
symbol for the measuring instrument. Connection to
the measuring instrument is set up and the symbol for
the instrument changes.
Alternatively, you can click on the symbol for the
instrument with the right mouse button and you will
then receive a context sensitive menu from which to
select. Select “Open”, to activate the required
measuring instrument. The measuring instrument has
to be connected and switched to the correct port.

Locations and directories can be set up in the archive;

familiar to you from Windows Explorer®. You can set up,
copy, delete etc. sub-directories by clicking the right mouse
button on a directory or a location.

If there are saved measurements in the measuring
instrument and these are shown below the measuring
instrument, you can drag and drop the data from the
measuring instrument to a folder in the archive. You can
copy several items by keeping the Control button pressed.
You can also copy the data (from the measuring instrument
or archive) into the work area for display purposes. Mark
the required data with the mouse and drag it into the work
area.