Keysight Technologies USB data capturing module U2354A Input: 500 kS/s U2354A OPT 902 + ABD Scheda Tecnica

59

Product specifi cations

Voltage

[2]

100.000 mV

10 MΩ

-

0.015 + 0.008

0.002 + 0.0008

1.00000 V

10 MΩ

-

0.015 + 0.005

0.001 + 0.0005

10.0000 V

10 MΩ

-

0.018 + 0.005

0.002 + 0.0005

100.000 V

10 MΩ

-

0.018 + 0.005

0.002 + 0.0005

300.000 V

10 MΩ

-

0.018 + 0.005

0.002 + 0.0005

Current

[3]

10.0000 mA

-

< 0.2 V, 10 Ω

0.06 + 0.015

0.005 + 0.0025

100.000 mA

-

< 0.2 V, 1 Ω

0.06 + 0.005

0.008 + 0.002

1.0000 A

-

< 0.3 V, 0.1 Ω

0.15 + 0.007

0.005 + 0.002

2.0000 A

-

< 0.8 V, 0.1 Ω

0.15 + 0.007

0.005 + 0.002

Resistance

[4]

100.000 Ω

-

1.0 mA

0.03 + 0.008

0.006 + 0.0008

1.00000 kΩ

-

1.0 mA

0.03 + 0.005

0.006 + 0.0005

10.0000 kΩ

-

100 μA

0.03 + 0.005

0.006 + 0.0005

100.000 kΩ

-

10.0 μA

0.03 + 0.005

0.006 + 0.0005

1.00000 MΩ

-

1 μA

0.06 + 0.005

0.01 + 0.0005

10.0000 MΩ

-

225 nA

0.25 + 0.005

0.025 +0.0005

100.000 MΩ

-

225 nA || 10 MΩ

2.0 + 0.005

0.3 + 0.0005

Diode test

[5]

1.0000 V

-

1.00 mA

0.015 + 0.03

0.005 + 0.0005

Continuity test

[6]

1.0000 kΩ

-

1.00 mA

0.05 + 0.03

0.005 + 0.0005

To ensure better measurement results and to guard against the change of environment or setup, always 
enable the Null offset.

[1]

 Specifi cations are based on 30 minutes warm-up time, NPLC 20 resolution, and calibration temperature within 18 °C to 28 °C. For NPLC 0 and 0.025, 

add 0.01% of range.

[2]

 120% over range on all ranges except 300 VDC. Input protection up to 300 VDC.

[3]

 Input protected with externally accessible 2 A, 250 V fast blown fuse.

[4]

 Specifi cations are for 4-wire Ω or 2-wire Ωs using null function in AMM software. If without null function in AMM software, add 0.2 Ω additional error. 

Input protection up to 300 VDC. Specifi cations apply for NPLC ≥ 1.

[5]

 Specifi cations are for the voltage measured at the input terminals only.

[6]

 Continuity threshold is fi xed at less than 10 Ω.