Samsung LE-37A456 Manuale Utente

You can make a recording of a TV programme using a recorder.
Press the 

 button.

Recording begins. (Only when the Anynet+ enabled recording device is connected.)

The current TV programme is recorded in the Watching TV status. If you are watching video from 

another device, the video from the device is recorded.

You can also record the source streams by selecting "Record" after pressing the 

TOOLS button.

Before recording, check whether the antenna jack is properly connected to the recording device. For 

the antenna connection to the recording device, refer to its user manual.

➣

➣

➣

1.  Press The TOOLS button. Then Press the ENTER  button 

to select "Anynet+(HDMI-CEC)". 

Press the ▲ or ▼ button to select "Receiver", then press the 

ENTER  button.

.  Press the ◄ or ► button to select to "On", then press the 

ENTER  button. 

Now you can listen to sound through the receiver.

.  Press the EXIT button to exit. 

When the receiver is set to On, you can listen to the TV sound 

through the 2-channel receiver.

If the receiver is exclusively for a home theatre only 

(supporting audio only), it may not appear in the device list.

Only when you have connected the optical jack of the TV and the receiver properly, does Receiver 

work.

In case of a content with copyright problem, listening through the receiver may not properly operate.

If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the 

power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. 

(see page 22) 

➣

➣

➣

➣

➣













BN68-01424D-Eng.indd   50

2008-03-03   ¿ÀÈÄ 5:22:13