Gw Instek PEL-3211 Electronic Load PEL-3211 Scheda Tecnica
Codici prodotto
PEL-3211
INTERFACE OVERVIEW
5
Interface Configuration
Configure to USB Remote Interface
USB
configuration
configuration
PC side
connector
connector
Type A, host
PEL-3000 side
connector
connector
Rear panel Type B, slave
Speed
2.0 (full speed)
USB Class
USB CDC AMC
Note
Before USB can be used for remote control, it is
necessary to install the PEL-3000 USB device
driver, located on the accompanying User Manual
CD.
necessary to install the PEL-3000 USB device
driver, located on the accompanying User Manual
CD.
Operation
1. Connect the USB cable to the rear panel USB B
port.
2. Press
Shift
+
Utility
Help
> Interface[F3] and set
the Interface setting to USB.