Rigol DSA815-TGSpectrum analyzer, spectrum analyzerBandwidth (RBW) 100 Hz - 1 MHz DSA815-TG Scheda Tecnica
Codici prodotto
DSA815-TG
快速指南
Quick Guide
©2011 RIGOL Technologies, Inc. All Rights Reserved.
DSA800 系列频谱分析仪
DSA800 Series Spectrum Analyzer
General Safety Summary
1. Use power cords designed for the instrument and
authorized by local country.
2.
authorized by local country.
2.
Make sure the instrument is grounded properly.
3.
Do not operate without covers.
4.
Use proper fuse.
5.
Avoid circuit or wire exposure.
6.
Do not operate with suspected failures.
7.
Keep proper ventilation.
8.
Do not operate in wet conditions.
9.
Do not operate in flammable and explosive
environment.
10.Keep product surface clean and dry.
11.Protect the instrument from static electricity.
12.Pay attention to handling safety.
11.Protect the instrument from static electricity.
12.Pay attention to handling safety.
Product Overview
DSA800 series spectrum analyzers which are small, light
and cost-effective, are portable spectrum analyzers
designed for starters. Configured with easy-to-operate
keyboard, high-resolution color LCD display and various
remote communication interfaces, they can be widely
used in various fields, such as education, company
research and development as well as industrial
manufacture.
and cost-effective, are portable spectrum analyzers
designed for starters. Configured with easy-to-operate
keyboard, high-resolution color LCD display and various
remote communication interfaces, they can be widely
used in various fields, such as education, company
research and development as well as industrial
manufacture.
Instrument Demensions: Width×Hight×Depth = 361.6 mm× 178.8 mm×128 mm
Weight: 4.25kg (with TG)
Weight: 4.25kg (with TG)
To Adjust the Supporting Legs
Users can unfold the supporting legs to use them as
stands to tilt the instrument upwards for easier
operation and observation. User can also fold the
supporting legs when the instrument is not in use for
easier storage or shipment.
stands to tilt the instrument upwards for easier
operation and observation. User can also fold the
supporting legs when the instrument is not in use for
easier storage or shipment.
Unfold the Supporting Legs
Fold the Supporting Legs
To Connect to Power
Connect the spectrum analyzer to AC power source
using the power cord supplied with the accessories.
DSA800 supports 100 V - 240 V, 45 Hz - 440 Hz AC
power source and 250V AC, T2A fuse.
using the power cord supplied with the accessories.
DSA800 supports 100 V - 240 V, 45 Hz - 440 Hz AC
power source and 250V AC, T2A fuse.
CAUTION
Make sure that the instrument is properly grounded
to avoid electric shock.
to avoid electric shock.
!
Start-up and Self-calibration
After connecting the instrument to power source
correctly, press
correctly, press
at the front panel to start the
spectrum analyzer. You can obtain information about
the start-up
the start-up
initialization process through the start-up
progress indications. Following the start-up screen, the
sweep curve is displayed. Press System
sweep curve is displayed. Press System
→
Calibrate
→
Cal Now and the instrument will perform self-
calibration (for more information, refer to the User's
Guide).
calibration (for more information, refer to the User's
Guide).
Using Notices
1.To use the tracking generator output terminal:
CAUTION
To avoid damage to the tracking
generator, the reverse power or
voltage can not exceed 1 W or 50
V DC.
generator, the reverse power or
voltage can not exceed 1 W or 50
V DC.
2. To use the RF input terminal:
CAUTION
To a v o i d d a m a g e t o t h e
instrument, for the signal input
from the RF input terminal, the
DC voltage component and the
maximum continuous power of
the AC (RF) signal component
can not exceed 50 V and 20
dBm respectively.
instrument, for the signal input
from the RF input terminal, the
DC voltage component and the
maximum continuous power of
the AC (RF) signal component
can not exceed 50 V and 20
dBm respectively.
Remote Control Overview
When the instrument is in remote mode, the
icon is
displayed
.
For More Product Information
For more information of this product, please refer to the
fo l l o w i n g m a n u a l s ( p r o v i d e d i n t h e “ C D ” i n t h e
accessories; you can also download them from the
RIGOL network):
User's Guide: provide detailed introductions of the
functions of this product;
Programming Guide: provide detailed introductions of
the SCPI commands and programming of this product;
Datasheet: provide the main characteristics and
specifications of this product;
A c c e s s o r i e s a n d O p t i o n s : p r o v i d e d e t a i l e d
introductions of the accessories and options of this
product.
fo l l o w i n g m a n u a l s ( p r o v i d e d i n t h e “ C D ” i n t h e
accessories; you can also download them from the
RIGOL network):
User's Guide: provide detailed introductions of the
functions of this product;
Programming Guide: provide detailed introductions of
the SCPI commands and programming of this product;
Datasheet: provide the main characteristics and
specifications of this product;
A c c e s s o r i e s a n d O p t i o n s : p r o v i d e d e t a i l e d
introductions of the accessories and options of this
product.
!
!
USB Device
LAN
TRIGGER IN
10MHz OUT
10MHz IN
AC Connector Fuse Seat Security Lock hole
Handle
文档 编号：QGD03X01-1110
2011年10月
You can obtain the instrument information including
model, serial number as well as hardware and software
version numbers through System
model, serial number as well as hardware and software
version numbers through System
→
Information
→
System Info. You can also view the list of installed
options through System
options through System
→
License.
DSA800 supports communication with PC via USB, LAN or
GPIB (option) interface for remote control. The remote
control is realized on the basis of SCPI (Standard
Commands for Programmable Instruments) command
set through two ways: user-defined programming and PC
software (such as RIGOL Ultra Sigma).
GPIB (option) interface for remote control. The remote
control is realized on the basis of SCPI (Standard
Commands for Programmable Instruments) command
set through two ways: user-defined programming and PC
software (such as RIGOL Ultra Sigma).
此处添加条形码
LCD Display Menu Softkeys/Control Keys Function Keys
Power Switch USB Host Earphone Tracking Generator Output RF Input
Restore to
preset
values
preset
values
Print
Help
Knob
Direction
Keys
Keyboard
ZN1 0 2 0 0 0 1 3 5 8