Sigma PC 26.14 PC 26.14B Scheda Tecnica

 

As shown in the navigation overview (section 1.3), to 
access the menu item “Set” press the enter button 
and then scroll to “Setting” by pressing the toGGLe/+ 
button. Finally, press the enter button again.

Select “device” from the settings menu to configure 
basic settings for the device, such as the language, 
date and time, tones, or contrast etc.

As described in the previous sections, use the  
toGGLe/+ and toGGLe/- buttons to select the 
values and the enter button to confirm your settings. 
If you want to go back a level, press the StoP button.

After each setting is made, the text “Setting oK”  
appears on the display.

If the upper target zone limit is breached, the device beeps three times every  
20 seconds (for as long as you are training outside the zone). 

If the lower limit is breached, a longer beep is emitted.

to prevent training sessions from being started by 
accident, the buttons can be locked. to do this,  
go to the “device” menu and navigate to “Key Lock”. 
to deactivate the lock press any button followed by 
the enter button.

on opening the “Setting” submenu, the user settings 
appear.

to access a further submenu within the user settings, 
press the enter button.

If, for example, you want to change the “Gender” from 
male to female, press enter. 

“Male” flashes as the current selection and can be 
changed to “Female” by pressing the toGGLe/+  
button. Confirm your setting by pressing enter.