Atmel Evaluation Kit AT91SAM9G25-EK AT91SAM9G25-EK Scheda Tecnica
Codici prodotto
AT91SAM9G25-EK
819
SAM9G25 [DATASHEET]
11032D–ATARM–10-Mar-2014
39.7.1.4 Baud Rate in ISO 7816 Mode
The ISO7816 specification defines the bit rate with the following formula:
where:
B is the bit rate
Di is the bit-rate adjustment factor
Fi is the clock frequency division factor
f is the ISO7816 clock frequency (Hz)
Di is a binary value encoded on a 4-bit field, named DI, as represented in
.
Fi is a binary value encoded on a 4-bit field, named FI, as represented in
.
shows the resulting Fi/Di Ratio, which is the ratio between the ISO7816 clock and the baud rate clock.
If the USART is configured in ISO7816 Mode, the clock selected by the USCLKS field in the Mode Register (US_MR) is
first divided by the value programmed in the field CD in the Baud Rate Generator Register (US_BRGR). The resulting
clock can be provided to the SCK pin to feed the smart card clock inputs. This means that the CLKO bit can be set in
US_MR.
first divided by the value programmed in the field CD in the Baud Rate Generator Register (US_BRGR). The resulting
clock can be provided to the SCK pin to feed the smart card clock inputs. This means that the CLKO bit can be set in
US_MR.
This clock is then divided by the value programmed in the FI_DI_RATIO field in the FI_DI_Ratio register (US_FIDI). This
is performed by the Sampling Divider, which performs a division by up to 2047 in ISO7816 Mode. The non-integer values
of the Fi/Di Ratio are not supported and the user must program the FI_DI_RATIO field to a value as close as possible to
the expected value.
is performed by the Sampling Divider, which performs a division by up to 2047 in ISO7816 Mode. The non-integer values
of the Fi/Di Ratio are not supported and the user must program the FI_DI_RATIO field to a value as close as possible to
the expected value.
The FI_DI_RATIO field resets to the value 0x174 (372 in decimal) and is the most common divider between the ISO7816
clock and the bit rate (Fi = 372, Di = 1).
clock and the bit rate (Fi = 372, Di = 1).
shows the relation between the Elementary Time Unit, corresponding to a bit time, and the ISO 7816 clock.
B
Di
Fi
------
f
×
=
Table 39-6. Binary and Decimal Values for Di
DI field
0001
0010
0011
0100
0101
0110
1000
1001
Di (decimal)
1
2
4
8
16
32
12
20
Table 39-7. Binary and Decimal Values for Fi
FI field
0000
0001
0010
0011
0100
0101
0110
1001
1010
1011
1100
1101
Fi (decimal)
372
372
558
744
1116
1488
1860
512
768
1024
1536
2048
Table 39-8. Possible Values for the Fi/Di Ratio
Fi/Di
372
558
774
1116
1488
1806
512
768
1024
1536
2048
1
372
558
744
1116
1488
1860
512
768
1024
1536
2048
2
186
279
372
558
744
930
256
384
512
768
1024
4
93
139.5
186
279
372
465
128
192
256
384
512
8
46.5
69.75
93
139.5
186
232.5
64
96
128
192
256
16
23.25
34.87
46.5
69.75
93
116.2
32
48
64
96
128
32
11.62
17.43
23.25
34.87
46.5
58.13
16
24
32
48
64
12
31
46.5
62
93
124
155
42.66
64
85.33
128
170.6
20
18.6
27.9
37.2
55.8
74.4
93
25.6
38.4
51.2
76.8
102.4