Mikroelektronika MikroE Development Kits MIKROE-1363 Scheda Tecnica
Codici prodotto
MIKROE-1363
Click BOOSTER PACK is the
add-on board for LaunchPad
®
from Texas Instruments
®
.
It features mikroBUS
™
host
socket, allowing developers to
use dozens of click
™
add-on
boards from mikroElektronika.
mikroBUS
™
host connector consists of two 1x8
female headers containing pins to be most likely
used in the target add-on board. There are three
groups of communication pins: SPI, UART and I2C.
There are also single pins for PWM, Interrupt,
Analog input, Reset and Chip Select. Pinout contains
two power groups: +5V and GND on one header and
+3.3V and GND on the other 1x8 header.
mikroBUS
™
host connector perfectly fits into
standard breadboards.
www.mikroe.com
for more information, please visit
What is mikroBUS
™
?
Click
™
boards are popular add-on boards in mikroBUS
™
form factor. Each one carries a specific functionality,
whether it is a communication layer, sensor, analog
input, storage module, etc. Click
™
boards are compact
in size and are easily integrated into target devices,
making them a great choice for fast prototyping.
Each comes with user manual and a set of examples.
What are click
™
boards?
AN
- Analog pin
RST
- Reset pin
CS
- SPI Chip Select line
SCK
- SPI Clock line
MISO
- SPI Slave Output line
MOSI
- SPI Slave Input line
+3.3V
- VCC-3.3V Power line
GND
- Reference Ground
PWM
- PWM output line
INT
- Hardware Interrupt line
RX
- UART Receive line
TX
- UART Transmit line
SCL
- I
2
C Clock line
SDA
- I
2
C Data line
+5V
- VCC-5V Power line
GND
- Reference Ground