STMicroelectronics 250W TRANSITION-MODE PFC PRE-REGULATOR WITH L6563S EVL6563S-250W EVL6563S-250W Scheda Tecnica

Codici prodotto
EVL6563S-250W
Pagina di 32
Thermal map
AN3119
26/32
Doc ID 16849 Rev 2
6 Thermal 
map
In order to check the design reliability, a thermal mapping by means of an IR camera was 
done. In 
 the thermal measurements of the board, component side at nominal 
input voltage, are shown. Some pointers visible in the image have been placed across key 
components or components showing high temperature. The ambient temperature during 
both measurements was 27 °C. It is possible to see that the PFC part has a different 
temperature depending on the input mains.
Figure 38.
Thermal map at 115 Vac - 60 Hz - full load - PCB top side
Figure 39.
Thermal map at 230 Vac - 50 Hz - full load - PCB top side