Conrad Energy remote control ARF 2185 mm ROC006 Scheda Tecnica

This product is an electrically powered model plane with radio remote control via a remote control system. The mo-

del is intended for outdoor use and must only be flown on days with little wind. The model airplane is pre-assembled 

and is delivered with built-in remote control and drive components. The product must not become damp or wet.
The product must not become damp or wet.
The product is not suitable for children under 14 years of age.

  Observe all safety information in these operating instructions. They contain important information on 

handling of the product.

 

You are solely responsible for safe operation of the model!

The electrical flight model „V-Tail“ is a pre-fabricated ARF model (ARF = „Almost Ready to Fly“), that is made ready 

for use in just a few steps. All drive and control components are built-in and ready for use. 
The flight model is controlled (motor speed, flight direction, flight height) via a radio remote control that must be 

purchased separately. The flight model is suitable for model plane beginners who have some initial experience with 

similar models.

•  Fuselage
•  Left and right elevator unit
•  Left and right wings
•  Wing rod
•  Small parts (e.g. screws)
•  Operating Instructions 

  Operation also requires a radio remote control with at least 5 channels and V-mixer (we recommend a 

computer remote control system with 6 channels), a flight battery (3 cells LiPo, 11.1 V, 1200 mAh and up, 

25C), a suitable high-voltage plug system and a charger with charging cable.