Conrad Energy remote control ARF 2185 mm ROC006 Scheda Tecnica

  The scope of delivery does not include the matching radio remote control. Depending on the scope of 

function of the radio remote control that is used, two servos must be connected with a Y-cable. The const-

ruction kit contains two such Y-cables. Thus, e.g. both ailerons and both wing flaps can be connected with 

a Y-cable each and controlled at one receiver output each. 

 

The selected radio remote control should also have a „V-mixer“ to warrant use of the elevator as well as 

the rudder. 

 

For comfortable, complete use of all control options, we recommend using a computer radio remote 

control with 6 or more channels. Also observe the notes in chapter 12.

The receiver (1) is attached to the rear part of the cockpit with hook-and-loop tape or double-sided adhesive tape. 

First, connect all cables of the elevator, aileron and the wing flaps (2) and the connection cable of the flight controller 

(3) to the corresponding receiver outputs. For this, observe the operating instructions of your remote control system.